Constructional indicators of concrete on cubical crushed stone
DOI:
https://doi.org/10.32347/2707-501x.2018.35.38-44Keywords:
concrete, cubiform crushed stone, concrete structures, precast reinforced concrete.Abstract
Requirements for concretes regarding their operational qualities, areas of application, physical-technical properties, and terms of durability expand the area of economic application of fillers of various types. Considering that fillers occupy up to 80% of the concrete volume and their cost reaches 50% of the cost of concrete and reinforced concrete products, it becomes clear that correct selection of fillers and the most rational application of them have a great on properties of the concrete mix of concrete and reinforced concrete structures, technical-economic efficiency of producing building products made of precast, monolithic concrete and reinforced concrete in whole. The article presents comparative results of tests of ordinary and cubiform crushed stones, studies of basic physical-technical properties of concrete with cubiform granite crushed stone (compression strength, split-tensile strength, frost-resistance, waterproofness, water adsorption, and coefficient of resistance to air permeability). As a result of comparative studies conducted, it is established that the use of cubiform crushed stone as a large-size filler is reasonable for concretes of structures operating under conditions of central and eccentric compression.
References
Старчуков Д.С. Бетоны ускоренного твердения с добавками твердых веществ неорганической природы // Бетон и железобетон. 2011. № 14. С. 22–24.
Загер И.Ю., Яшинькина А.А., Андропова Л.Н. Сравнительная оценка продуктов дробления горных пород месторождений нерудных строительных материалов Ямало-Ненецкого автономного округа // Строительные материалы. 2011. № 5. С. 84–86.
Добшиц Л.М., Магомедэминов И.И. Определение морозостойкости крупного заполнителя для тяжелых бетонов // Бетон и железобетон. 2012. № 4. С. 16–19.
Петров В.П., Токарева С.А. Пористые заполнители из отходов промышленности // Строительные материалы. 2011. № 12. С. 46–50.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2020 S. Leonovych, N. Poleiko
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).