Adaptation of the MODAPTS microelemental regulation system to the conditions of modern monolithic construction
DOI:
https://doi.org/10.32347/2707-501x.2026.57(2).164-172Keywords:
innovative technologies, monolithic structures, process standardization, micro-element labor physical movements (micro-element standardization), alternative designAbstract
The article examines the problem of standardizing technological processes for the installation of monolithic structures in multi-story frame buildings, stemming from the shortcomings of existing regulatory information sources that utilize an overly generalized (complex) approach to calculating time resources. An analysis of the current technological level of monolithic frame building construction revealed a significant number of structural and technological innovations not covered by current national or international labor cost standards. Furthermore, leading global construction companies do not disclose data regarding the labor intensity of their proprietary developments, creating a challenge in justifying optimal structural and technological solutions (STS) and necessitating the development of new analytical tools.
It is demonstrated that transitioning the time-standardization system from the level of construction operations to the level of worker action complexes, using the MODAPTS micro-element standardization system well-known in mechanical engineering, paves the way for a new, dynamic methodology. This system allows for the evaluation of labor costs for any innovative frame construction technologies, including those currently under development. The specific features of construction production required a revision of the approach to defining the MOD micro-module. Based on the research results, the author's micro-element standardization system "BUDTS" was developed, representing a modification of MODAPTS adapted to construction conditions. The key change is the increase of the basic time unit from 0.129 to 0.25 and 0.5 seconds. Such modules allow for a more accurate accounting of movement inertia and the complexity of manipulating heavy and bulky materials or equipment. The transformation of the system into a "macro-mod" format ensures high-speed standardization during the alternative design of construction technologies for monolithic frame buildings.
References
Осипов О.Ф., Осипов С.О., Осипова А.О. Зведення монолітних багатоповерхових будинків. Проектування технології: навч. посіб. Вид. 3-тє, випр. і допов. Київ: Ямчинський О.В., 2020. 195 с.
Гетун Г.В., Криштоп Б.Г. Багатоповерхові каркасно-монолітні житлові будинки. навч. посіб. Київ: КОНДОР, 2005. 220 с.
Монолітно-каркасний будинок: Особливості будівництва. URL: https://park-hills.in.ua/ru/blog/monolitno-karkasnyy-budynok-osoblyvosti-budivnytstva. (дата звернення: 12.12.2025).
ДБН В 2.2-15:2019. Будинки і споруди. Житлові будинки. Основні положення. Зі Зміною № 1. [Чинний від 2022.09.01]. К.: Мінрегіон, 2022. 53 с.
ДСТУ Б В.2.6-205:2015. Настанова з проектування монолітних бетонних і залізобетонних конструкцій будівель та споруд. [Чинний від 2016.01.01]. К.: Мінрегіон, 2015. 28 с.
Тонкачеєв Г.М., Молодід О.С., Тонкачеєв В.Г., Шандра О.Г. Інноваційні технології каркасного будівництва: навч. посіб. К.: Видавництво Ліра-К, 2024. 316 с.
Осипов О.Ф. Науково-методологічні основи проектування технології зведення монолітних конструкцій і споруд. Містобудування та територіальне планування. 2005. Вип. 21. С. 237-243.
Шаленний В.Т., Клочко Б.Г., Холоднюк В.П. Щодо необхідності удосконалення нормативної бази та організації сучасного монолітного домобудування. Вісник Придніпровської державної академії будівництва та архітектури. 2005. № 4. С. 54-58.
Молодід О.С., Шандра О.Г. Методи нормування процесів зведення монолітних будівельних конструкцій. Шляхи підвищення ефективності будівництва. 2023. Вип. 52(1). С. 55-61. DOI: https://doi.org/10.32347/2707-501x.2023.52(1).55-61
КНУ. Ресурсні елементні кошторисні норми на будівельні роботи. Збірник 6: Бетонні та залізобетонні конструкції монолітні. Затверджені наказом Міністерства розвитку громад та територій України 31.12.2021. № 374. 119 с.
ДСТУ Б Д.2.2-1:2008. Бетонні та залізобетонні конструкції монолітні. Збирання та розбирання опалубки (збірник 6). К.: Мінрегіонбуд, 2008.
ДСТУ Б Д.2.2-2:2008. Бетонні та залізобетонні конструкції монолітні. Арматурні роботи (збірник 6) К.: Мінрегіонбуд, 2008.
ДСТУ Б Д.2.2-3:2008. Бетонні та залізобетонні конструкції монолітні. Бетонні роботи (збірник 6). К.: Мінрегіонбуд, 2008.
ЕНиР Сб. Е4. Монтаж сборных и устройство монолитных железобетонных и бетонных конструкций. Вып. 1. Здания и промышленные сооружения. М.: Стройиздат, 1987. 65 с.
Hei S., Zhang H. Identifying time wastage of prefabricated building hoisting operations based on the MODAPTS and field measurement method: A case study in Nanjing, China. E3S Web of Conferences, 2024, 546: 02009. DOI: https://doi.org/10.1051/e3sconf/202454602009
Zandin B. MOST Work Measurement Systems. 3rd Ed. CRC Press, 2002. 552 р.
Sullivan B. Heyde’s MODAPTS: A Language of Work. Brisbane, Australia: Heyde Dynamics Pty Ltd, 2001. 218 р.
Тонкачеєв Г.М., Тонкачеєв В.Г. Визначення тривалості процесу монтажу та демонтажу опалубки за методом цілочисленого нормування. Будівельне виробництво. 2019. №67. С. 31-36. https://doi.org/10.36750/2524-2555.67.31-36
Tonkacheiev H.M., Rudnieva I.M., Tonkacheiev V.H., Priadko Yu.M. Features of standard time formation to implement construction processes: a case study. Strength of Materials and Theory of Structures. 2022. № 109. С. 141-149. DOI: 10.32347/2410-2547.2022.109.141-151.
